Loading ...
Loading ...
Loading ...
Waveform Setup
R&S
®
RTB2000
50User Manual 1333.1611.02 ─ 03
1 = start or stop a continuous acquisition, or start a single acquisition if SINGLE is active
2 = adjust the acquisition mode
3 = shows the current sample rate for information
4.4.2 Acquisition Settings
Acquisition settings define the processing of the captured samples in the instrument.
The current acquisition mode and sample rate are shown in the top information bar.
► To adjust acquisition settings, press the ACQUISITION key.
Record Length
The instrument acquires the signals with an either automatically or selected record
length. Record length is the number of waveform samples that are stored in one wave-
form record.
With automatic record length, the instrument combines sample rate and record length
to acquire at maximum sample rate. In connection with persistence, this mode can dis-
play rare signal anomalies.
Each predefined record length corresponds to a maximum number of history seg-
ments, which are stored in the instrument's memory. If option R&S RTB-K15 is instal-
led, you can display the history segments.
Remote command:
ACQuire:POINts:AUTomatic on page 260
ACQuire:POINts[:VALue] on page 261
Acquisition Setup
Loading ...
Loading ...
Loading ...