Loading ...
Loading ...
Loading ...
Serial Bus Analysis
R&S
®
RTB2000
166User Manual 1333.1611.02 ─ 03
●
SPI (2 wires)
●
SSPI (3 wires)
●
I
2
C
●
UART
●
CAN
●
LIN
Remote command:
BUS<b>:TYPE on page 371
Decode
Enables protocol decoding for the selected bus.
Remote command:
BUS<b>:STATe on page 371
Configuration
Opens or closes the dialog box with configuration settings of the selected bus.
The following chapters describe manual protocol configuration:
●
Chapter 13.5, "Parallel Buses", on page 224
●
Chapter 12.2.2, "SPI/SSPI Configuration", on page 173
●
Chapter 12.3.2, "I
2
C Configuration", on page 182
●
Chapter 12.4.2, "UART Configuration", on page 189
●
Chapter 12.5.1, "CAN Configuration", on page 195
●
Chapter 12.6.2, "LIN Configuration", on page 209
Trigger
Opens the trigger setup for the selected protocol.
The following chapters describe protocol triggering:
●
Chapter 12.2.3, "SPI/SSPI Trigger", on page 176
●
Chapter 12.3.3, "I
2
C Trigger", on page 183
●
Chapter 12.4.3, "UART Trigger", on page 191
●
Chapter 12.5.2, "CAN Trigger", on page 197
●
Chapter 12.6.3, "LIN Trigger", on page 210
Triggering on parallel buses is not possible.
Note: Selecting "Trigger" in the protocol menu automatically enables protocol decod-
ing.
Display Setup
Opens a menu to define display settings, e.g. data formats. Display settings are valid
for all protocol types.
See
Chapter 12.1.2, "Display Settings", on page 167.
Label List
Opens a menu to load and apply a list with symbolic names of addresses or identifiers.
Only available for CAN and LIN.
See
Chapter 12.1.5, "Label List", on page 169.
Basics of Protocol Analysis
Loading ...
Loading ...
Loading ...