Loading ...
Loading ...
Loading ...
Remote Control Commands
R&S
®
RTB2000
259User Manual 1333.1611.02 ─ 03
TIMebase:POSition <Offset>
Defines the trigger position, the time distance from the trigger point to the reference
point (trigger offset). The trigger point is the zero point of the diagram. Changing the
horizontal position, you can move the trigger, even outside the screen.
See also:
TIMebase:REFerence on page 259
Parameters:
<Offset> Range: Depends on time base setting
Increment: 0.01
*RST: 0
Default unit: s
TIMebase:REFerence <ReferencePoint>
Defines the time reference point in the diagram. The reference point is the rescaling
center of the time scale on the screen. If you modify the time scale, the reference point
remains fixed on the screen, and the scale is stretched or compressed to both sides of
the reference point.
The reference point defines which part of the waveform is shown. By default, the refer-
ence point is displayed in the center of the window, and you can move it to the left or
right.
See also:
TIMebase:POSition on page 259
Parameters:
<ReferencePoint> 8.33 | 50 | 91.67
8.33 = left position (1 div); 50 = middle position; 91.67 = right
position (11 div).
*RST: 50
Default unit: %
TIMebase:ACQTime <AcquisitionTime>
TIMebase:RANGe <AcquisitionTime>
Defines the time of one acquisition, that is the time across the 10 divisions of the dia-
gram: Timebase Scale*10.
Parameters:
<AcquisitionTime> Range and increment depend on time base and other settings
Range: 250e-12 to 500
Increment: 1e-12
Default unit: s
TIMebase:DIVisions?
Queries the number of horizontal divisions on the screen.
Waveform Setup
Loading ...
Loading ...
Loading ...