Loading ...
Loading ...
Loading ...
Network Connections and Remote Operation
R&S
®
RTB2000
156User Manual 1333.1611.02 ─ 03
IP Port, VXI-11 Port
Specify the IP port number (default = 5025) and the VXI-11 port number (default =
1024).
Remote command:
SYSTem:COMMunicate:INTerface:ETHernet:IPPort on page 368
SYSTem:COMMunicate:INTerface:ETHernet:HTTPport on page 368
Link
"Yes", if the instrument is connected to a local area network via the LAN interface on
the rear panel.
"No", if no LAN connection is detected.
Transfer
Enables automatic transfer speed selection and shows the currently selected value.
Alternatively, you can select one of the predefined settings that corresponds to your
network data rate.
Remote command:
SYSTem:COMMunicate:INTerface:ETHernet:TRANsfer on page 368
MAC, VISA
Show the instrument's media access control address, and the virtual instrument soft-
ware architecture (VISA) address that is used to address the instrument in remote con-
trol.
Remote command:
SYSTem:COMMunicate:INTerface:ETHernet:MACaddress? on page 369
Host name
Shows or specifies the name of the instrument, which the instrument can use to con-
nect to the DHCP server.
Status
Shows the connection status, for example "Allocating network address" or "DHCP, IP
address received".
Password
Specifies an optional password for remote access to the instrument.
11.2 USB Connection
In addition to a LAN connection, you can use the USB connector at the rear panel to
access the instrument via USB.
Connecting the instrument using USB
1. Connect the USB cable to the USB type B connector at the rear panel of the instru-
ment, and to the computer.
USB Connection
Loading ...
Loading ...
Loading ...