Loading ...
Loading ...
Loading ...
Measurements
R&S
®
RTB2000
107User Manual 1333.1611.02 ─ 03
Remote command:
MEASurement<m>:STATistics:RESet on page 311
Delete all Measurements
Deactivates all active measurements.
Reference Level
Set the lower and upper reference levels for rise and fall time measurements. Sets also
the middle reference level used for phase and delay measurements. The levels are
defined as percentages of the high signal level. The settings are valid for all measure-
ment places.
Remote command:
REFLevel:RELative:MODE on page 316
REFLevel:RELative:LOWer on page 316
REFLevel:RELative:MIDDle on page 317
REFLevel:RELative:UPPer on page 316
7.3 Cursor Measurements
The cursor measurement determines the results at the current cursor positions. You
can set the cursor lines manually at fixed positions, or they can follow the waveform.
Available results depend on the cursor type and the type of the waveform.
Cursor Measurements
Loading ...
Loading ...
Loading ...