Loading ...
Loading ...
Loading ...
Trigger
R&S
®
RTB2000
61User Manual 1333.1611.02 ─ 03
Polarity.......................................................................................................................... 61
Comparison...................................................................................................................61
Time t............................................................................................................................ 62
Variation........................................................................................................................62
Time t1, Time t2............................................................................................................ 62
Threshold...................................................................................................................... 62
Hysteresis..................................................................................................................... 62
Polarity
Sets the polarity of the pulse. You can trigger on:
●
positive going pulse, the width is defined from the rising to the falling slopes.
●
negative going pulse, the width is defined from the falling to the rising slopes.
Remote command:
TRIGger:A:WIDTh:POLarity on page 270
Comparison
Sets how the measured pulse width is compared with the given limits.
"Width >"
Triggers on pulse width longer than the reference "Time t".
"Width <"
Triggers on pulse width shorter than the reference "Time t".
"Width ="
Triggers on pulse width equal to the reference "Time t" if "Variation"
Δt = 0.
If "Variation" ≠ 0, this setting triggers on pulses within the range t±Δt.
"Width ≠"
Triggers on pulses unequal to the reference "Time t", if "Variation"
Δt = 0.
If "Variation" ≠ 0, this setting triggers on pulses outside a range t
±
Δ
t.
Width Trigger
Loading ...
Loading ...
Loading ...