Loading ...
Loading ...
Loading ...
Waveform Setup
R&S
®
RTB2000
39User Manual 1333.1611.02 ─ 03
To get the maximum resolution of the waveform amplitude, make sure that the wave-
forms cover most of the screen's height.
Remote command:
CHANnel<m>:SCALe on page 253
CALCulate:QMATh:SCALe on page 278
REFCurve<m>:VERTical:SCALe on page 281
LOGIC
Enables the logic channels. The second keypress opens the menu, where you can
select and configure digital channels for analysis. If the menu is open, pressing the key
disables the logic channels.
Key function requires MSO option R&S RTB-B1.
Logic analyzer functions are described in
Chapter 13, "Logic Analyzer (Option
R&S RTB-B1, MSO)"
, on page 220.
REF
Displays the reference waveforms with their last configuration. The key works in the
same way as the channel keys, see
"CH <N>" on page 38.
Reference wavforms are described in
Chapter 6.3, "Reference Waveforms",
on page 74.
MATH
Enables the math waveform, a waveform calculated from the captured data. The key
works in the same way as the channel keys, see
"CH <N>" on page 38.
Mathematics is described in
Chapter 6.2, "Mathematics", on page 71.
4.2.2 Short Menu for Analog Channels
To adjust the probe and the coupling, you can use the short menu. Here you can also
open the comprehensive menu, and switch off the channel.
► To open the short menu for a channel, tap the channel label in the bottom line of
the display.
If the channel was not selected, tap twice: Once to select the waveform, and next
to open the short menu.
Vertical Setup
Loading ...
Loading ...
Loading ...