Loading ...
Loading ...
Loading ...
Documenting Results
R&S
®
RTB2000
131User Manual 1333.1611.02 ─ 03
The supported file system in all storage locations is FAT.
9.1 Saving and Loading Instrument Settings
To repeat measurements or tests at different times or perform similar measurements
with different test data, you can save the used configuration settings. Furthermore, it
can be helpful to refer to the configuration settings of a particular measurement when
analyzing the results. Therefore, you can easily save the complete measurement con-
figuration including the display settings. The settings are saved together with a small
screenshot of the display for better identification of the setup files.
By default, instrument settings are saved to the internal storage /INT/SETTINGS, but
you can also save them to USB flash drive.
If you often save and load instrument settings, try the following shortcuts:
●
The "Save Setup" toolbar icon saves the current settings to a file according to the
settings in "File" menu > "Setup". The "Load Setup" toolbar icon opens a dialog to
select and load a setup. See also
"Configuring the Toolbar" on page 33.
●
Configure OneTouch to save instrument settings. See
Chapter 9.5, "Quick Save
with OneTouch"
, on page 139.
To save, load, reset, export and import instrument settings
1. Press the SAVE LOAD key.
2. Select "Setup"
3. Select the required function.
Save
Opens a dialog box to save the current instrument setup to file.
To change the storage location, select "Destination" > "Location".
Change the filename if the auto name does not fit. The file extension SET is set auto-
matically. You can enter an optional comment that describes the setup.
Saving and Loading Instrument Settings
Loading ...
Loading ...
Loading ...