Loading ...
Loading ...
Loading ...
Remote Control Commands
R&S
®
RTB2000
367User Manual 1333.1611.02 ─ 03
SYSTem:DFPRint?
Returns the device footprint of the instrument. The device footprint contains the config-
uration of the instrument, installed modules, installed software and software licenses.
This information is written in the device footprint xml file might be useful in case of
maintenance or support request.
Return values:
<DeviceFootprint> Block Data
Information as block data.
Usage: Query only
SYSTem:TREE?
REturns a list of the implemented remote commands.
Return values:
<SystemTree> List of commands
Usage: Query only
15.10.3 LAN Settings
The following commands take effect if
SYSTem:COMMunicate:INTerface[:
SELect]
is set to ETHernet.
SYSTem:COMMunicate:INTerface:ETHernet:DHCP..........................................................367
SYSTem:COMMunicate:INTerface:ETHernet:IPADdress................................................... 368
SYSTem:COMMunicate:INTerface:ETHernet:SUBNet....................................................... 368
SYSTem:COMMunicate:INTerface:ETHernet:GATeway.....................................................368
SYSTem:COMMunicate:INTerface:ETHernet:IPPort..........................................................368
SYSTem:COMMunicate:INTerface:ETHernet:HTTPport.....................................................368
SYSTem:COMMunicate:INTerface:ETHernet:TRANsfer.....................................................368
SYSTem:COMMunicate:INTerface:ETHernet:MACaddress?.............................................. 369
SYSTem:COMMunicate:INTerface:ETHernet:DHCP
Enables DHCP for automatic network parameter distribution.
Parameters:
<DHCP> ON | OFF
OFF
Use the following commands to specify connection parameters:
SYSTem:COMMunicate:INTerface:ETHernet:IPADdress
on page 368
SYSTem:COMMunicate:INTerface:ETHernet:SUBNet
on page 368
SYSTem:COMMunicate:INTerface:ETHernet:GATeway
on page 368
General Instrument Setup
Loading ...
Loading ...
Loading ...