Loading ...
Loading ...
Loading ...
Serial Bus Analysis
R&S
®
RTB2000
216User Manual 1333.1611.02 ─ 03
3. Press the Search key.
4. Select the "Search Type" = "Protocol".
5. Select the "Source": the bus that is configured for LIN protocol.
6. Select the "Event" you want to search for.
7. Enter additional settings, depending on the event.
LIN Search Settings
Figure 12-30: Search on LIN bus for frames with identifier 2C (hex) that have an error
Event...........................................................................................................................216
Frame Setup............................................................................................................... 216
Error............................................................................................................................ 216
Identifier condition.......................................................................................................217
Data condition............................................................................................................. 217
Event
Sets the event or combination of events to be searched for. Depending on the selected
event, additional settings are displayed.
Remote command:
SEARch:PROTocol:LIN:CONDition on page 428
Frame Setup
Selects the frame type to be searched for.
Remote command:
SEARch:PROTocol:CAN:FRAMe on page 415
Error
Selects the error type to be searched for. You can select one or more error types as
search condition. The error types are the same as in the LIN trigger setup.
See also
"Error" on page 212.
The setting is only available if "Event" = "Error" or "ID & Error" is selected.
LIN (Option R&S RTB-K3)
Loading ...
Loading ...
Loading ...