Loading ...
Loading ...
Loading ...
Waveform Analysis
R&S
®
RTB2000
77User Manual 1333.1611.02 ─ 03
Copy
Copies the "Source" waveform to the selected reference waveform. The reference
waveform is kept until you update it or load another waveform to the reference.
Remote command:
REFCurve<m>:UPDate on page 280
State
Activates the reference waveform and displays it.
Remote command:
REFCurve<m>:STATe on page 279
Load Reference
Provides functions to load a reference waveform.
Select the "Location" of the waveform file (internal or USB), and the file. Tap "Load
Reference".
You can also delete obsolete files in the dialog box.
Remote command:
REFCurve<m>:LOAD on page 280
Load Setup
Loads the device settings that were used to obtain the stored reference waveform. The
settings are only available if the file was stored to the internal storage and never written
to a USB flash device.
Load the reference waveform first, and then the settings. If settings were not stored,
"Load Setup" is not active.
Remote command:
REFCurve<m>:LOAD:STATe on page 280
Save Reference
Opens a dialog box to save a waveform as reference waveform:
"Source"
Select the waveform to be saved. You can save any active analog
channel, math or reference waveform, or logic pod.
"Destination"
Select the "Location" (internal directory or USB flash device), and the
target directory.
"File Name"
Enter the filename. If a file with the same filename already exists in
the destination directory, it will be overwritten without notification.
"Comment"
Optionally, enter text to describe the waveform.
"Save"
Saves the data.
Remote command:
REFCurve<m>:SAVE on page 280
Waveform Color
Selects a color for the reference waveform. The default color is white. You can select
another monochrome color, or a color scale.
The color scales are described in
"Waveform Color" on page 42.
Reference Waveforms
Loading ...
Loading ...
Loading ...