Loading ...
Loading ...
Loading ...
Waveform Setup
R&S
®
RTB2000
40User Manual 1333.1611.02 ─ 03
Functions in the short menu:
●
"AC | DC": see
"Coupling" on page 40
●
"Ground" on page 41
●
"Probe": opens the "Probe" menu, see
●
"Off": turns off the channel.
●
"Menu": opens the comprehensive "Vertical" menu.
4.2.3 Vertical Settings
The comprehensive "Vertical" menu contains all vertical settings.
► To open the menu for a channel, press the corresponding channel key.
If the channel was active but not selected, press twice: Once to select the wave-
form, and next to open the short menu.
The "Vertical" menu is also available in the main menu.
Figure 4-2: Vertical setup dialog, here split into two halves
State
Switches the selected channel on or off.
Remote command:
CHANnel<m>:STATe on page 252
Coupling
Selects the input coupling, which influences the signal path between input connector
and the following internal signal stage. The current coupling of each channel is shown
in the waveform labels below the grid.
Vertical Setup
Loading ...
Loading ...
Loading ...