Loading ...
Loading ...
Loading ...
Operating Basics
R&S
®
RTB2000
32User Manual 1333.1611.02 ─ 03
CLEAR SCREEN
Deletes all waveforms, annotations and the measurement results of deleted wave-
forms. All settings remain unchanged.
Remote command:
DISPlay:CLEar[:SCReen] on page 360
3.4.2 Analysis Controls
The controls in the ANALYSIS functional block open various menus for signal analysis.
NAVIGATION
The function of this universal rotary knob depends on the usage context:
●
If selection menu is open: turn the knob to select a value.
●
If a numerical value is selected in the menu, and the keypad is closed: turn the
knob to set a value.
●
If the cursors are selected, press the key to select a cursor line. Turn the knob to
change the position of the selected cursor line.
●
If an on-screen keypad or on-screen keyboard is open: turn the knob until the
required character is highlighted, then press the knob to apply the selection.
CURSOR
Enables the cursor with the last configured cursor setup. The second keypress opens
the "Cursor" menu. If the menu is open, pressing the key turns off the cursor and
closes the menu.
MEAS
Opens the "Measure" menu, where you can configure up to 4 parallel measurements.
Available measurement types depend on the type of the selected waveform.
INTENSITY
Opens the "Intensities" menu to adjust the luminosity of display elements and the per-
sistence.
QUICKMEAS
Displays the results of basic automatic measurements for the selected channel below
the grid and directly on the waveform.
Press the key to stop quick measurements.
Front Panel Keys
Loading ...
Loading ...
Loading ...