Loading ...
Loading ...
Loading ...
Serial Bus Analysis
R&S
®
RTB2000
217User Manual 1333.1611.02 ─ 03
Remote command:
SEARch:PROTocol:LIN:CHKSerror on page 429
SEARch:PROTocol:LIN:IPERror on page 429
SEARch:PROTocol:LIN:SYERror on page 429
Identifier condition
Settings to define the identifier pattern, if "Event" = "Identifier" or "ID & Data" or "ID &
Error" is selected.
After setting the "Compare" condition, you can enter the identifier value by setting the
state high, low, or X (do not care) for each single bit. Alternatively, you can enter a hex-
adecimal value for each half byte.
The settings are the same as for the setup of the identifier trigger, see also "Identifier
condition"
on page 212.
If a label list with node names was loaded and applied in the bus configuration, you
can select the node name from the list instead of entering the numeric identifier. The
instrument triggers on the identifier of the selected node.
Remote command:
SEARch:PROTocol:LIN:ICONdition on page 430
SEARch:PROTocol:LIN:IDENtifier on page 430
Data condition
Settings to define the data pattern to be searched, if "Event" = "ID & Data" is selected.
After setting the "Data" length and the "Compare" condition, you can enter the data
value by setting the state high, low, or X (do not care) for each single bit. Alternatively,
you can enter a hexadecimal value for each half byte.
The settings are the same as for the setup of the data trigger, see also
"Data condition"
on page 213.
Remote command:
SEARch:PROTocol:LIN:DLENgth on page 430
SEARch:PROTocol:LIN:DCONdition on page 430
SEARch:PROTocol:LIN:DATA on page 431
12.6.6 LIN Label List
For general information on label lists and how to trigger on symbolic IDs, see
Chap-
ter 12.1, "Basics of Protocol Analysis"
, on page 164.
Label lists are protocol-specific. Label lists for LIN are available in CSV and PTT for-
mat.
A LIN label file contains two values for each identifier:
●
Identifier value
●
Symbolic name for the identifier
Example of a LIN PTT file
# ----------------------------------------------------------------------------
@FILE_VERSION = 1.0
LIN (Option R&S RTB-K3)
Loading ...
Loading ...
Loading ...