Loading ...
Loading ...
Loading ...
Remote Control Commands
R&S
®
RTB2000
247User Manual 1333.1611.02 ─ 03
15.2.4 Function Generator
Configure and output a sine waveform.
Command description in:
Chapter 15.13.1, "Function Generator", on page 442.
*RST
:WGEN:FUNC SIN // Selects Sine function
:WGEN:VOLT 700E-3 // Sets the amplitude
:WGEN:FREQ 1.00E+06 // Sets the frequency
:WGEN:OUTP:LOAD R50 // Sets the user load
:WGEN:OUTP 1 // Outputs the sine waveform
15.3 Common Commands
Common commands are described in the IEEE 488.2 (IEC 625-2) standard. These
commands have the same effect and are employed in the same way on different devi-
ces. The headers of these commands consist of "*" followed by three letters. Many
common commands are related to the Status Reporting System.
Available common commands:
*CAL?...........................................................................................................................247
*CLS.............................................................................................................................247
*ESE.............................................................................................................................248
*ESR?...........................................................................................................................248
*IDN?............................................................................................................................248
*OPC............................................................................................................................248
*OPT?...........................................................................................................................248
*PSC............................................................................................................................ 249
*RST.............................................................................................................................249
*SRE............................................................................................................................ 249
*STB?...........................................................................................................................249
*TRG............................................................................................................................ 250
*WAI.............................................................................................................................250
*CAL?
Performs a self-alignment of the instrument and then generates a status response.
Return values ≠ 0 indicate an error.
Usage: Query only
*CLS
Clear status
Sets the status byte (STB), the standard event register (ESR) and the EVENt part of
the QUEStionable and the OPERation registers to zero. The command does not
alter the mask and transition parts of the registers. It clears the output buffer.
Common Commands
Loading ...
Loading ...
Loading ...