Loading ...
Loading ...
Loading ...
Applications
R&S
®
RTB2000
128User Manual 1333.1611.02 ─ 03
Meter
Selects one of the four available meter measurements. The configuration of the
selected meter is displayed in the menu.
Source
Selects an analog channel as the source of the selected meter measurement.
Remote command:
DVM<m>:SOURce on page 336
Type
Defines the measurement type to be performed on the selected source:
●
DC: mean value of the signal
●
AC+DC RMS: RMS value of the signal
●
AC RMS: RMS value of the signal's AC component
Select "Off" to disable the selected meter measurement.
Remote command:
DVM<m>:TYPE on page 336
8.5 Trigger Counter
The counter shows two basic parameters of the trigger source: frequency and period.
1.
Press the
APPS SELECTION key.
2. Tap "Trigger Counter".
A result box shows the trigger source, and the frequency and period of the trigger
source. Tap inside the box to toggle the values. You can drag the box on the screen to
move it to the best position.
Trigger Counter
Loading ...
Loading ...
Loading ...