Loading ...
Loading ...
Loading ...
Remote Control Commands
R&S
®
RTB2000
371User Manual 1333.1611.02 ─ 03
15.11.1 General
BUS<b>:TYPE...............................................................................................................371
BUS<b>:STATe.............................................................................................................371
BUS<b>:FORMat...........................................................................................................371
BUS<b>:LABel.............................................................................................................. 371
BUS<b>:LABel:STATe................................................................................................... 372
BUS<b>:DSIGnals......................................................................................................... 372
BUS<b>:DSIZe..............................................................................................................372
BUS<b>:POSition.......................................................................................................... 372
BUS<b>:RESult.............................................................................................................373
BUS<b>:TYPE <Type>
Defines the bus or interface type for analysis. All buses require special option to the
instrument.
Suffix:
<b>
.
1 | 2
Parameters:
<Type> PARallel | CPARallel | I2C | SPI | SSPI | UART | CAN | LIN
*RST: PARallel
BUS<b>:STATe <State>
Switches protocol decoding on or off.
Suffix:
<b>
.
1 | 2
Parameters:
<State> ON | OFF
*RST: OFF
BUS<b>:FORMat <Format>
Sets the decoding format for the display on the screen.
Suffix:
<b>
.
1 | 2
Parameters:
<Format> ASCii | HEXadecimal | BINary | DECimal | OCTal
*RST: HEX
BUS<b>:LABel <Label>
Defines an additional name label for the selected bus. The maximum name length is 8
characters, and only ASCII characters provided on the on-screen keypad can be used.
Serial Bus Analysis
Loading ...
Loading ...
Loading ...