Loading ...
Loading ...
Loading ...
81
For more information on the settings listed in this menu, refer to the table provided below:
Parameter
Description
Channel
In the Channel list, select the channel that you want to configure the settings
for.
Smart Codec
Enable the smart codec function. This function can reduce the video bit stream
for non-important recorded video to maximize the storage space.
Type
Main Stream: In the Type list, select General, MD (Motion Detect), or
Alarm.
Sub Stream: This setting is not configurable.
Compression
In the Compression list, select the encode mode.
H.265: Main profile encoding.
H.264H: High profile encoding. Low bit stream with high definition. This
setting is recommended.
H.264: General profile encoding.
H.264B: Baseline profile encoding. This setting requires higher bit stream
compared with other settings for the same definition.
Resolution
In the Resolution list, select resolution for the video.
The maximum video resolution might be different dependent on your DVR
model.
Frame Rate (FPS)
Configure the frames per second for the video. The higher the value, the clearer
and smoother the image will become. Frame rate changes along with the
resolution.
Generally, in PAL format, you can select the value from 1 through 25; in NTSC
format, you can select the value from 1 through 30. However, the specific range
of frame rate that you can select depends on the capability of the DVR.
Quality
The higher the value, the better the image will become.
I Frame Interval
The interval between two reference frames.
Loading ...
Loading ...
Loading ...