Loading ...
Loading ...
Loading ...
58
To configure the video loss settings on your DVR, select the Video Loss tab in the Video Detect menu and
toggle the Enable switch to the on position. For more information on the settings set in this menu, refer
to the table listed below.
Parameter
Description
Channel
In the Channel list, select a channel to set the motion detection.
Enable
Enable or disable the motion detection function.
Period
Define a period during which the motion detection is active.
CAM Anti-Dither
Configure the event detection lasting time. The system records only one
event during this period. The value ranges from 5 seconds to 300 seconds.
Alarm Out
Click Setting to display setting interface.
General Alarm: Enable alarm activation through the alarm DVRs
connected to the selected output port.
External Alarm: Enable alarm activation through the connected alarm
box.
Wireless Siren: Enable alarm activation through DVRs connected by
USB gateway or camera gateway.
Latch
Set a length of time for the DVR to delay turning off alarm after the external
alarm is cancelled. The value ranges from 0 seconds to 300 seconds, and the
default value is 10 seconds. If you enter 0, there will be no delay.
Show Message
Select the Show Message check box to enable a pop-up message in your
local host PC.
Send Email
Select the Send Email check box to enable the system to send an email
notification when an alarm event occurs.
Note: To use this function, make sure the email notification function is
enabled for the DVR. (Main Menu>NETWORK>EMAIL
Loading ...
Loading ...
Loading ...