Loading ...
Loading ...
Loading ...
68
◼ General Alarm: Enable alarm activation through the alarm DVRs connected to the
selected output port.
◼ External Alarm: Enable alarm activation through the connected alarm box.
◼ Wireless Siren: Enable alarm activation through DVRs connected by USB gateway or
camera gateway.
• Latch: Set a length of time for the DVR to delay turning off alarm after the external alarm is
cancelled. The value ranges from 0 seconds to 300 seconds, and the default value is 10 seconds. If
you enter 0, there will be no delay.
• Buzzer: This checkbox allows the user to enable the system to activate a buzzer when an abnormality
occurs.
• Log: Allows the user to log all motion detected events that are triggered in the DVR.
• Send Email: This checkbox allows the user to enable the system to send an email when an abnormality
occurs.
• Voice Prompts (N/A): Allows the user to customize voice prompts for motion detected events.
To save settings, click the Apply button. To cancel any modifications, click the Cancel button near the
bottom right hand corner. To apply the settings, click the Apply button near the bottom right hand
corner.
4.10. Backup
The Backup function tile allows you to search and backup data to an external USB storage DVR. The DVR
has two USB ports, one in the front and one in the back to utilize this function.
4.10.1. Configuring Backup Settings
When you inset a USB storage DVR into the USB port of the DVR, the DVR will automatically detect the
USB storage DVR. A pop up will appear, "Find USB DVR" interface, which provides you a shortcut to
perform backup and upgrading operations. To access the Backup settings, click on File Backup from the
interface.
This will take you to the Backup menu:
Loading ...
Loading ...
Loading ...