Loading ...
Loading ...
Loading ...
65
4.8.6.1. HDD
This screen allows the user to specify actions that occur when there is an abnormality with the DVR’s hard
disk drive (HDD). Below is a screenshot of the HDD Abnormality settings screen:
Below is an explanation of the fields on the HDD Abnormality settings screen:
• Event Type: This field allows the user to specify which HDD abnormality event type they would like to
configure settings for.
o No HDD: No hard drive is detected.
o HDD Error: The hard drive has an error.
o HDD No Space: The hard drive is about to or has run out of space.
• Enable: This checkbox allows the user to enable the features below for the specified event type.
• Alarm Out: Click Setting to display setting interface.
◼ General Alarm: Enable alarm activation through the alarm DVRs connected to the
selected output port.
◼ External Alarm: Enable alarm activation through the connected alarm box.
◼ Wireless Siren: Enable alarm activation through DVRs connected by USB gateway or
camera gateway.
• Show Message: This checkbox allows the user to enable the system to show an on-screen message
when an HDD abnormality occurs.
• Alarm Upload: This checkbox allows the user to enable the system to upload alarm information when a
motion detection alarm is triggered.
• Send Email: This checkbox allows the user to enable the system to send an email when an HDD
abnormality occurs.
Loading ...
Loading ...
Loading ...