Loading ...
Loading ...
Loading ...
16
7. Put the cover on in accordance
with the clip and then place the
upper cover back on.
8. Secure the screws in the rear
panel and the side panel.
Note:
• An HDD is NOT included with the DVR by default.
• To connect the HDD, connect the HDD data cable and the power cable
before attaching the HDD in the DVR.
• To remove the front cover, push the clip first, and then slide the cover
off.
3.3 Connection Port Information
3.3.1 Power Supply Connection
Please check to make sure the input voltage is correct, and the power button is in the
off position when connecting the power supply.
We recommend you use an Uninterruptible Power Supply (UPS) to guarantee
steady operation of the DVR, as well as to elongate the life span of the DVR and
other peripheral equipment such as attached cameras and other accessories.
3.3.2 Video Input/Output Connections
3.3.2.1 Video Input Connection Information
The video input interface is BNC.
The input video format includes: PAL/NTSC BNC (1.0VBP- P, B75Ω)
The video signal should comply with your national standards.
The input video signal should have high SNR, low distortion; low interference,
natural color and suitable brightness.
Loading ...
Loading ...
Loading ...