Loading ...
Loading ...
Loading ...
111
For more information on the settings listed in this menu, refer to the table below.
Parameter
Description
Channel
In the Channel list, select a channel to record the video.
Pre-record
In the Pre-record list, enter the amount of time that you want to start the
recording in advance.
Redundancy
If there are several HDDs installed to the DVR, you can set
one of the HDDs as the redundant HDD to save the recorded
files into different HDDs. In case one of the HDDs is damaged,
you can find the backup in the other HDD.
Select Main Menu > STORAGE > HDD MANAGER, and then set a HDD as
redundant HDD.
Select Main Menu > STORAGE > SCHEDUE > Record, and then select the
Redundancy check box.
If the selected channel is not recording, the redundancy function
takes effect next time you record no matter you select the check box
or not.
If the selected channel is recording, the current recorded files will be
packed, and then start recording according to the new schedule.
Note: Not all models support this function. If the option is greyed out on the
screen, it means it is not supported with your specific DVR. The redundant HDD
does not back up snapshots.
Event type
Select the check box of the event type which includes General, MD (motion
detect, video loss, tempering, diagnosis), Alarm (IoT alarms, local alarms,
alarms from alarm box, IPC external alarms, IPC Offline alarms), MD&Alarm,
Intel (IVS events, face detection), and POS.
Period
Define a period during which the configured recording setting is active.
Loading ...
Loading ...
Loading ...