Loading ...
Loading ...
Loading ...
100
For more information about the settings listed in this menu, refer to the table below:
Parameter
Description
Enable
Enable the email function.
SMTP Server
Enter the address of SMTP server of sender’s email account.
Port
Enter the port value of SMTP server. The default value setting is 25. You can
enter the value according to your actual situation.
User Name
Enter the user name and password of sender’s email account.
Password
Anonymity
If enable the anonymity function, you can login as anonymity.
Mail Receiver
In the Mail Receiver list, select the number of receivers that you want to
receive the notification. The DVR supports up to three mail receivers.
Email Address
Enter the email address of mail receiver(s).
Sender
Enter the sender’s email address. It supports maximum three senders
separated by comma.
Title
Enter the email subject.
Supports Chinese, English and Arabic numerals. It supports maximum 64
characters.
Attachment
Enable the attachment function. When there is an alarm event, the system
can attach snapshots as an attachment to the email.
Authentication
Select the encryption type: NONE, SSL, or TLS.
Interval (Sec.)
This is the interval that the system sends an email for the same type of
alarm event, which means, the system does not send an email upon any
alarm event.
This setting helps to avoid the large amount of emails caused by frequent
alarm events.
The value ranges from 0 to 3600. 0 means that there is no interval.
Health Enable
Enable the health test function. The system can send a test email to check
the connection.
Interval (Min.)
This is the interval that the system sends a health test email.
The value ranges from 30 to 1440. 0 means that there is no interval.
Test
Click Test to test the email sending function. If the configuration is correct,
the receiver’s email account will receive the email.
Note: Before testing, click Apply to save the settings.
Popular Email Servers, Ports, and Encryptions
Loading ...
Loading ...
Loading ...