User Manual - Page 64

For GC728XP-100NAS.

Loading ...
Loading ...
Loading ...
Configure System Information
64
Insight Managed 28-Port and 52-Port Gigabit Ethernet Smart Cloud Switches
The default password is password. If you added the switch to a network on the Insight
app before and you did not yet change the password through the local browser interface,
enter your Insight network password.
The System Information page displays.
5. Select System > Management > Green Ethernet > Green Ethernet Details.
The Green Ethernet Details page displays.
6. From the Interface menu, select the interface.
7. From the EEE Admin mode menu, select Enable or Disable.
With the EEE mode enabled, the port transitions to low power mode during a link idle
condition. The default value is Disabled. If the EEE Admin Mode is not supported, N/A is
displayed.
8. In the EEE Transmit Idle Time field, enter the time after which switch transitions to the LPI
state.
The range is 600 to 4294967295. The default value is 600.
9. In the EEE Transmit Wake Time field, enter the time that the switch must wait before it
transitions to the active state after it receives a packet for transmission.
The range is 8 to 65535. The default value is 17.
10. Click the Apply button.
Your settings are saved.
11. To refresh the page, click the Refresh button.
12. To clear the configuration, resetting all statistics for the selected interface to default values,
click the Clear button.
The following table describes the nonconfigurable fields.
Table 15. Green Ethernet Local Device Information
Field Description
Cumulative Energy Saved on this
port due to Green mode(s) (Watts
* Hours)
Cumulative energy saved due to all green modes enabled on this port in
watts * hours.
Rx Low Power Idle Event Count This field is incremented each time MAC RX enters low-power idle (LPI)
state. Shows the total number of Rx LPI events since EEE counters were
last cleared.
Rx Low Power Idle Duration
(uSec)
This field indicates duration of Rx LPI state in 10 us increments. Shows the
total duration of Rx LPI since the EEE counters were last cleared.
Tx Low Power Idle Event Count This field is incremented each time MAC TX enters LPI state. Shows the
total number of Tx LPI events since EEE counters were last cleared.
Tx Low Power Idle Duration
(uSec)
This field indicates duration of Tx LPI state in 10 us increments. Shows the
total duration of Tx LPI since the EEE counters were last cleared.
Loading ...
Loading ...
Loading ...