Loading ...
Loading ...
Loading ...
Configuring Routing
214
Insight Managed 28-Port and 52-Port Gigabit Ethernet Smart Cloud Switches
The following table provides information included in the management VLAN ARP cache
section.
The following table provides information included in the routing VLANs ARP cache section.
Create a Static ARP Entry
You can add a static entry to the ARP table.
 To add an entry to the ARP table:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Access the Switch on page 13.
The login window opens.
4. Enter the switch’s password in the password field.
Table 59. ARP cache information
Field Description
IP Address The associated IP address of a device on a subnet attached to one of the
switch’s existing routing interfaces.
Port The associated interface of the connection.
MAC Address The MAC address of the device.
Table 60. ARP cache information for routing VLANs
Field Description
IP Address The associated IP address of a device on a subnet attached to one of the switch's
existing routing interfaces.
Interface The routing interface associated with the ARP entry.
MAC Address The unicast MAC address of the device.
Type The type of the ARP entry. Possible values are:
• Local. An ARP entry associated with one of the switch’s routing interface’s MAC
addresses.
• Gateway. A dynamic ARP entry for which the IP address is that of a router.
• Static. An ARP entry configured by the user.
• Dynamic. An ARP entry which was learned by the switch
Age Age since the entry was last refreshed in the ARP Table. The format is hh:mm:ss.
Loading ...
Loading ...
Loading ...