Loading ...
Loading ...
Loading ...
Configure Switching
155
Insight Managed 28-Port and 52-Port Gigabit Ethernet Smart Cloud Switches
Enter six two-digit hexadecimal numbers separated by colons, for example
00:01:23:43:45:67.
7. Click the Go button.
If the address exists, the entry is displayed. An exact match is required.
8. To refresh the page with the latest information about the switch, click the Refresh button.
9. To clear the information, click the Clear button.
The following table describes the information in the IGMP snooping table.
Configure IGMP Snooping for VLANs
 To configure IGMP snooping settings for VLANs:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Access the Switch on page 13.
The login window opens.
4. Enter the switch’s password in the password field.
The default password is password. If you added the switch to a network on the Insight
app before and you did not yet change the password through the local browser interface,
enter your Insight network password.
The System Information page displays.
5. Select Switchingï€ > Multicast > IGMP Snooping > IGMP Snooping VLAN Configuration.
Table 43. IGMP Snooping Table information
Field Description
MAC Address The multicast MAC address for which the switch holds forwarding and/or filtering
information. The format is six two-digit hexadecimal numbers that are separated
by colons, for example, 01:00:5e:45:67:89.
VLAN ID The VLAN ID for which the switch holds forwarding and filtering information.
Type The type of the entry. Static entries are those that are configured by the end
user. Dynamic entries are added to the table as a result of a learning process or
protocol.
Description The text description of this multicast table entry. Possible values are
Management Configured, Network Configured, and Network Assisted.
Interface The interfaces that are designated for forwarding (Fwd) and filtering (Flt) for the
associated address.
Loading ...
Loading ...
Loading ...