Loading ...
Loading ...
Loading ...
Configure System Information
29
Insight Managed 28-Port and 52-Port Gigabit Ethernet Smart Cloud Switches
View and Configure the Switch Management Settings
This section describes how to display the switch status and specify some basic switch
information, such as the management interface IP address, system clock settings, and DNS
information. The following sections describe how you can configure the switch management
settings:
• View or Define System Information on page 29
• View the Switch CPU Status on page 34
• Configure the IPv4 Address for the Network Interface and Management VLAN on
page 37
• Configure the IPv6 Address for the Network Interface on page 38
• View the IPv6 Network Neighbor on page 40
• Configure the Time Settings on page 41
• Configure Denial of Service Settings on page 55
• Configure DNS Settings on page 57
• Configure Green Ethernet Settings on page 61
View or Define System Information
When you log in, the System Information page displays. You can configure and view general
device information.
 To view or define system information:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired network connection, or connect directly to a switch that is
off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Access the Switch on page 13.
The login window opens.
4. Enter the switch’s password in the password field.
The default password is password. If you added the switch to a network on the Insight
app before and you did not yet change the password through the local browser interface,
enter your Insight network password.
The System Information page displays.
Loading ...
Loading ...
Loading ...