GC728XP-100NAS User Manual

Loading ...

Perform Maintenance Tasks

352

Insight Managed 28-Port and 52-Port Gigabit Ethernet Smart Cloud Switches

3. In the address field of your web browser, enter the IP address of the switch.

If you do not know the IP address of the switch, see Access the Switch on page 13.

The login window opens.

4. Enter the switch’s password in the password field.

The default password is password. If you added the switch to a network on the Insight

app before and you did not yet change the password through the local browser interface,

enter your Insight network password.

The System Information page displays.

5. Select Maintenance > Image Management > Dual Image > Dual Image Configuration.

The Dual Image Configuration page displays.

6. From the Image Name menu, select the image that is not the image displayed in the

Current-active field.

The Current-active field displays the name of the active image.

7. To specify a name for the selected image, enter one in the Image Description field.

8. Select the Activate Image check box.

9. Click the Apply button.

Your settings are saved.

Note: After activating an image, you must perform a system reset of the

switch to run the new code. The switch continues running the image

shown in the Current-active field until the switch reboots.

Delete an Image

 To delete an image:

1. Connect your computer to the same network as the switch.

You can use a WiFi or wired connection to connect your computer to the network, or

connect directly to a switch that is off-network using an Ethernet cable.

2. Launch a web browser.