Loading ...
Loading ...
Loading ...
2
Select the SSID of the wireless LAN to which you want to connect, and press .
➠ The Network Ke
y input screen is displayed.
When selecting the SSID of the wireless LAN router supporting WPA-EAP or WPA2-EAP for the security
standard, the message [IEEE 802.1X Settings values will be applied to connect.] appears. Select [OK] and
press
, and proceed to Step 4.
If you cannot nd the wireless LAN router to which you want to connect, check that the router is
discoverable. Cannot Connect to Wireless LAN(P. 591)
3
Enter the network key, and press [<Apply>]
.
4
Check the message, and select [Yes] .
5
When [Connected.] is displayed on the control panel, wait a few minutes.
➠ When the machine is connected to the wir
eless LAN, [
] appears on the [Home] screen.
By default, an IP addr
ess is set automatically.
To use a specic IP address, set this manually.
Setting IPv4 Addresses(P. 77)
Setting IPv6 Addresses(P. 81)
If an Error Message Appears during Operation and a Connection Cannot Be Established
● Select [Close] and pr
ess
, check the information (SSID or network key) of the wireless LAN router to
which you want to connect, and repeat the procedure starting from Step 2.
Setting Up
71
Loading ...
Loading ...
Loading ...