Loading ...
Loading ...
Loading ...
- [Use HTTP](P. 449)
- [IPP Print Settings](P. 449)
- [mDNS Settings](P. 445)
- [Network Link Scan Settings](P. 449)
Setting the Functions and Security to Be Used with AirPrint
AirPrint uses the following protocols:
● IPP (printing and sending fax
es)
● Network Link Scan (scanning)
The protocol to use varies with the function. Therefore, you can restrict the available functions by disabling the
protocols. In addition, you can congure the settings to encrypt communication with TLS and congure IPP
authentication when using a protocol.
Congure these settings using Remote UI from a computer. You cannot use the control panel to congure the
settings.
Administrator privileges are required.
Required Preparations
● When encrypting communication with TLS, specify the k
ey and certicate to use for TLS encrypted
communication.
Using TLS(P. 360)
1
Log in to Remote UI in System Manager Mode. Starting Remote UI(P. 399)
2
On the Portal page of Remote UI, click [Settings/Registration]. Portal Page of
Remote UI(P
. 401)
3
Click [Network Settings]
[IPP Print Settings] or [Network Link Scan Settings]
[Edit].
➠ The [Edit IPP Print Settings] scr
een or [Edit Network Link Scan Settings] screen is displayed.
4
Congure the IPP or Network Link Scan settings.
When Restricting the Functions to Use
Clear the [Use IPP Printing] or [Use Network Link Scan] checkbo
xes.
● When you clear the [Use IPP Printing] checkbox, printing and sending faxes with AirPrint are no longer
possible.
● When you clear the [Use Network Link Scan] checkbox, scanning is no longer possible with AirPrint.
When Encrypting Communication with TLS
Select the [Allo
w Only When Using TLS] or [Use TLS] checkbox.
When Setting IPP Authentication
Select the [Use Authentication] checkbo
x, and set the user name to be used for IPP authentication using
single-byte alphanumeric characters.
Linking with Mobile Devices
334
Loading ...
Loading ...
Loading ...