Loading ...
Loading ...
Loading ...
[Note:]
・The blinking of the alarm notification button is not linked to the alarm notification
operation such as recording to the SD Memory Card or mail transfer. Check the
setting of each operation.
[Note:]
・Set [Super Dynamic] to [Off] when the following phenomena are observed
depending on the lighting condition.
-when flickering or color changes occur
-when noise is generated in the bright area of the screen
according to the settings in [⑦ Layout Setup pull-down Menu].
[Camera 1:Image of camera 1 is displayed as a single image.
[Camera 2:Image of camera 2 is displayed as a single image.
③[Camera title]
The title of the camera entered in [Camera title] on the [Basic] tab is displayed.
→3.2 [Basic] to perform basic settings
④[Alarm Notification] button*4
The lamp blinks when an alarm is generated. Click the button to disappear.
⑤[Main area]
Live displays the camera image.
⑥[Capacity display]
The remaining capacity and total capacity of the SD Memory Card are displayed.
⑦[Layout Settings] pull-down menu
Select "[Left/right display]" or "[Up/down display]" as the layout of images to be displayed in
the area ⑤. The Layout Setting pull-down menu is displayed when [Camera 1-Camera 2] is
selected in the Display Camera Switching pull-down menu.
[Left/right display]: Images of cameras 1 and 2 are displayed in left-right alignment.
[Up/down display]: Images of cameras 1 and 2 are displayed in the upper and lower positions.
⑧[Super dynamic setting]
You can set [On] or [Off] to activate the super dynamic function. You can set for each preset
position. See [What is Super Dynamic] for details on super dynamic.
[On]:The Super Dynamic function is activated.
[Off]:Stops the superdynamic function.
⑨[Light control mode] pull-down menu
Select the mode to control the light intensity from the following.
2 Operation
2.4 Viewing images from mobile/tablet terminals
55
Loading ...
Loading ...
Loading ...