Loading ...
Loading ...
Loading ...
[Command alarm]:Notifies the MQTT server when a command alarm is entered.
[Topic]
Specify the name of the MQTT topic to be sent. The topics are hierarchically separated by /.
Number of characters that can be entered:1 to 128 characters
Input Characters:Single-byte alphanumeric and single-byte symbols
Prohibited Characters:One-byte symbol ¥
[Payload]
Set the MQTT message payload.
Number of characters that can be entered:1 to 128 characters
Input Characters:Single-byte alphanumeric and single-byte symbols
Prohibited Characters:One-byte symbol ¥
[QoS]
Select the level of QoS from 0, 1, or 2. 0<1<Communication quality is high with 2.
0:QoS0 delivers up to one message. Messages are not guaranteed to reach the server.
1:In QoS1, messages are delivered at least once. Messages are guaranteed to reach the
destination, but may be duplicated.
2:QoS2 delivers the message exactly once. Messages are guaranteed to arrive only once without
excess or deficiency.
[Retain]
Check this box to have the last notified message saved on the MQTT server.
4.10.2.11 Configure LLDP
This section configures the LLDP (Link Layer Discovery Protocol) function. Interoperation can be
realized by transmitting and receiving the device information of the camera with LLDP-compatible
devices.
4 Advanced settings
4.10 Networking configuration [Network]
339
Loading ...
Loading ...
Loading ...