Loading ...
Loading ...
Loading ...
[Note:]
・If you do not know how to authenticate e-mail, contact your network administrator.
[Note:]
・Some SMTP servers may not support SSL.
・The SMTP over SSL method is supported. STARTTLS is not supported.
・If set to [On], you might need to set the SMTP port number to 465. Check with
your provider for details.
Authentication-User Name
Enter the username that you want to access the server.
Number of characters that can be entered:0 to 32 characters
Characters that cannot be entered:Double-byte and single-byte symbols " & : ; ¥
Authentication-Password
Enter the password to access the server.
Number of characters that can be entered:0 to 128 characters
Characters that cannot be entered:Double-byte and single-byte symbols " &
[Sender's E-mail address]
Enter the sender's mail address.
The entered mail address is displayed in the From field of the received mail.
Number of characters that can be entered:3 to 128 characters
Input Characters:Half-pitch alphanumeric and half-pitch symbols @ . _ ‑
[SSL]
When sending [Alarm Notification] or [Diag.] mail notification in SSL-encrypted format, set it to
[On]. When set to [On], the authentication method is set to [SMTP]. Configure the [User name]
and [Password] for authentication.
[Address 1] through [Address 4]
Set the mail address of the notification destination. You can set up to 4 notification destinations.
Number of characters that can be entered:3 to 128 characters
Input Characters:Half-pitch alphanumeric and half-pitch symbols @ . _ ‑
To delete a set e-mail address, press [Delete] for the e-mail address to delete.
[Terminal 1]:Mail is notified when an alarm is generated at terminal 1.
[Terminal 2]:Mail is notified when an alarm is generated at terminal 2.
[Terminal 3]:Mail is notified when an alarm is generated at terminal 3.
4 Advanced settings
4.10 Networking configuration [Network]
313
Loading ...
Loading ...
Loading ...