Loading ...
Loading ...
Loading ...
[Note:]
・Remaining capacity notification is made for each remaining capacity value below
the set value.
For example, when set to [50%], the remaining capacity is 50%, 20%, 10%, 5%, and
2%, respectively. The timing of notification may deviate slightly.
[Important]
・If you do not want to use the SD Memory Card, set it to [Not use].
・Before removing the SD Memory Card from the computer, be sure to set it to
[Not use]. If the SD Memory Card is set to [Use], the SD Memory Card may be
damaged.
・When the SD Memory Card is set to [Use], the SD Memory Card is saved
according to the [Save trigger] setting.
・After installing the SD Memory Card, set it to [Use].
・If the image update speed is high, the timing and interval of notification and
recording may be misaligned. In addition, when multiple users receive images,
notification or recording may not be performed as set. In that case, slow down the
image update rate.
・The number of SD Memory Card rewrites is limited. If rewriting is frequent, the
life of the watch may be shortened.
・The life of the SD Memory Card is affected by the number of image files saved to
the SD Memory Card and the number of logs written.
・You can reduce the number of files saved to the SD Memory Card by selecting
the stream in [Recording format] and setting the smaller value in [Bit Rate*/
[Remaining capacity notification]
To notify the remaining capacity of the SD Memory Card using the mail notification function or the
unique alarm notification function, select the following whether to start notification when the free
space becomes the %.
50%/ 20%/ 10%/ 5%/ 2%
[Overwrite]
You set whether to overwrite and save images when the free space on the SD Memory Card is
running low.
[On]:If the free space on the SD Memory Card decreases, the old image is overwritten and saved
repeatedly.
[Off]:If the SD Memory Card has no free space, the SD Memory Card stops storing data.
4 Advanced settings
4.5 [Basic] for basic setup of the machine
152
Loading ...
Loading ...
Loading ...