Loading ...
Loading ...
Loading ...
[Note:]
・Notification of unique alarms is made in the order from [Notify Party 1] (only when
checked in the [Alarm] or [Diag.] field).
[Note:]
・[MULTI] The port numbers 32768 to 49151 cannot be set.
ON/OFF is used to specify whether or not to perform unique alarm notification in the following
cases.
・When an alarm is generated (unique alarm notification destination: [Alarm] field)
・When notifying the remaining capacity of the SD Memory Card (unique alarm notifying
destination: [Diag.] field)
・When there is insufficient space on the SD Memory Card (unique alarm notification destination:
[Diag.] field)
・When recognizing an SD Memory Card error (Original alarm notification destination: [Diag.]
field)
・When writing to SD Memory Card is failed (unique alarm notification destination: [Diag.] field)
・Upon expiration of the trial period of the function extension software (original alarm notification
destination: [Diag.] field)
[Additional alarm data]
Sets ON/OFF whether the detection area number of the operation detection alarm is notified by
the unique alarm.
[Destination port]
Set the receiving port number of the unique alarm notification destination.
Settable range:1～65535
The following port numbers cannot be set because they are used by this computer.
20、 21、 22、 23、 25、 42、 53、 67、 68、 69、 80 110、 123、 161、 162、 443、 554、 995、
1883、 8883、 10669、 10670、 59000～61000
[Retry times]
Set the number of retries when the unique alarm notification cannot be performed.
Settable range:0～30
Destination of notification
PTZ camera
4 Advanced settings
4.8 [Alarm] to set the alarm
285
Loading ...
Loading ...
Loading ...