Loading ...
Loading ...
Loading ...
[Note:]
・The privacy zone should be set broadly for objects that you want to hide.
It is recommended to set the zone between 1 and 3 times the zoom magnification
to increase the zone accuracy on the wide angle side.
[Note:]
・If enabled, the privacy zone will not be displayed if you move to a magnification
lower than the set zoom magnification.
Select the display format of the privacy zone from the following.
[On]:Display in gray
[Off]:Not displayed.
[Zone select]
Click [▼] on the [Zone No] and select the number of zones you want to set.
The [*] mark to the right of the zone number indicates that a privacy zone has already been set.
When you drag the desired range with the mouse, it is set as the privacy zone.
Once the position has been determined, press [Set].
To delete a registered zone, specify the zone number and press [Delete].
To cancel setting or deletion, press [Cancel].
[Privacy zone:Min. Zoom]
Use [On] or [Off] to toggle the smallest zoom in zones.
[On]:The current zoom position is saved.
[Disable]:The zoom position is saved as X1 times. The privacy zone is always displayed regardless
of the zoom position.
[Zoom] buttons
:Adjust the zoom factor in the [Telescope] direction.
:Zoom (magnification) 1.0 times.
:Adjust the zoom factor in the [Wide angle] direction.
[Focus] buttons
[Auto]:Automatically adjust focus.
[Near]:Adjust the focus (focus) to [Near].
[Far]:Adjust the focus (focus) to [Far].
Control pad/button
Left-click the pads and buttons to adjust the horizontal and vertical position of the image (pan
tilt).
4 Advanced settings
4.6 [Image/Audio] for setting images and sound files
211
Loading ...
Loading ...
Loading ...