Loading ...
Loading ...
Loading ...
[Note:]
・The items that can be set differ depending on the function of the model.
・Refer to the catalog specifications for the functions installed in each model.
[Note:]
・If [Transmission protocol] is set to SFTP, [FTP transmission retry] cannot be
set.
[Note:]
・When JPEG (1) is set to the resolution of the image to be sent, the pre-alarm
cannot be set if the resolution of JPEG (1) is larger than [1920x1080].
・When the image quality control at alarm is set to [On], only the post alarm is
recorded and the image quality at alarm is set. This does not apply to pre-alarm
recording.
[FTP transmission retry]
Select [On]/[Off] to retransmit if FTP transmission fails.
[On]:If forwarding fails, retransmission is performed until the forwarding is successful.
[Off]:If the transfer fails, the image is discarded and the next image is sent.
[Pre alarm]
Transmission interval
Select the image update interval before alarm from the following.
If [Image capture mode] is set to 60 fps mode, 30 fps mode, or 15 fps mode:
0.1fps/ 0.2fps/ 0.33fps/ 0.5fps/ 1fps
If [Image capture mode] is set to 50 fps mode/25 fps mode/12.5 fps mode:
0.08fps/ 0.17fps/ 0.28fps/ 0.42fps/ 1fps
Maximum number of images
Select the number of images to send from the following.
[0 pic]/[1 pic]/[2 pics]/[3 pics]/[4 pics]/[5 pics]/[6 *]/[7 *]/[8 *]/[9 *]/[10 *]/[20 *]/[30
*]/[40 *]/[50 *]
Recording duration
The set [Transmission interval] and [Maximum number of images] indicate the recording time of
the images prior to the alarm.
4 Advanced settings
4.10 Networking configuration [Network]
320
Loading ...
Loading ...
Loading ...