Loading ...
Loading ...
Loading ...
[Note:]
・The values that can be set depend on the resolution and bit rate of the stream to
be recorded. The higher the bit rate, the smaller the maximum value that can be
set as the pre-alarm time.
Within the display Description
‑‑‑‑‑‑‑‑MB/‑‑‑‑‑‑‑‑MB SD Memory Card is not inserted.
Otherwise, the remaining capacity cannot be acquired due to a
read error.
********MB/********MB SD Memory Card is not formatted.
########MB/########MB The password lock of the SD Memory Card cannot be canceled.
Select the number of alarm images to be saved to the SD Memory Card when an alarm is generated
from the following list.
[10 pics]/[20 pics]/[30 pics]/[50 pics]/[100 pics]/[200 pics]/[300 pics]/[500 pics]/[1000
pics]/[2000 pics]/[3000 pics]
Movie recording (when alarm is generated)
This setting is available only when the [Recording format] of the SD Memory Card is set to
streaming and [Save trigger] is set to [Alarm input].
[Pre alarm (recording) duration]
Select whether to record before alarm. Sets the time to save to the SD Memory Card.
[Off]/ [1s]/ [2s]/ [3s]/ [4s]/ [5s]/ [8s]/ [10s]/ [15s]/ [20s]/ [25s]/ [30s]/ [40s]/ [50s]/ [60s]/
[90s]/ [120s]
[Post alarm (recording) duration]
Sets the time to save to the SD Memory Card after an alarm is generated.
[10s]/ [20s]/ [30s]/ [40s]/ [50s]/ [60s]/ [120s]/ [180s]/ [240s]/ [300s]
*Actual recording time may be longer than the time set for the post alarm time.
SD memory card information
[Remaining capacity]
The remaining capacity and total capacity of the SD Memory Card are displayed.
Depending on the status of the SD Memory Card, it may be displayed as follows.
4 Advanced settings
4.5 [Basic] for basic setup of the machine
159
Loading ...
Loading ...
Loading ...