Loading ...
Loading ...
Loading ...
[Note:]
・Camera display with the IP easy setting software is always enabled and the camera
screen can be opened.
[Note:]
・The items that can be set differ depending on the function of the model.
・Refer to the catalog specifications for the functions installed in each model.
[FTP access to camera]
Select [Allow] or [Forbid] to determine whether to allow or forbid the FTP access to camera.
[Allow]:Allow to access FTP to the camera.
[Forbid]:Forbid to access FTP to the camera.
[ONVIF®]
Use [On]/[Off] to set whether to use the ONVIF function.
[Enable]:You can use the ONVIF function.
[Disabled]:The ONVIF function cannot be used.
4.10.2 [Advanced] for advanced networking settings
On the Network Page, press the [Advanced] tab. Refer to the following how to display and operate
the Advanced menu.
→4.2.1 How to display
→4.2.2 How to operate
Here, the SMTP (mail), FTP/SFTP, NTP, UPnP, HTTPS, DDNS, SNMP, QoS, SRTP, and MQTT
functions are set.
Click the link to each item to navigate to each setting page.
4.10.2.1 Set mail sending
[E-mail notification]
On/Off is used to specify whether to send mail in the following cases.
When an alarm is activated (e-mail to [Alarm] field)
When notifying the remaining capacity of the SD Memory Card (mail notifying destination: [Diag.]
4 Advanced settings
4.10 Networking configuration [Network]
311
Loading ...
Loading ...
Loading ...