Loading ...
Loading ...
Loading ...
For maintenance
Turn off the power before starting operation. Doing so may result in injury.
Do not apply or use organic solvents such as benzene and thinner. The case may become
discolored. Follow the precautionary statement when using chemical foil.
● Do not loosen or remove the screws not specified in the operation manual.
● [PTZ camera]
After maintenance, the camera may have changed its orientation. Be sure to refresh the
position or restart the machine. For details, please refer to the following.
→4.12.4 [Default reset] to initialize and restart the computer
Cleaning the dome cover
If the dome cover is dirty, clean it with a lens cleaning paper (for cleaning cameras and eyeglasses).
Picture shaking correction function
Depending on the installation location, the shaking correction function may not be sufficiently
effective.
Consumables
In some models, consumables are included in parts.
Refer to the web guide for consumables.
Motor operation noise
Depending on the operation speed of the pan or tilt, the operation sound may become louder. If
you are concerned about the operation sound from the auto pan, you can improve it by lowering
the set speed of the auto pan.
About the AVC Patent Portfolio License
This product is licensed under the AVC Patent Portfolio License and is not licensed except for
your personal and non-commercial use of the following:
(1) Image information shall be recorded in accordance with the AVC standard (hereinafter
referred to as AVC video).
(2) Playing AVC videos recorded by consumers engaged in personal activities or AVC videos
obtained from licensed providers. See the MPEG LA, LLC home page (https://www.mpegla.
com/) for more information.
Position Refresh
[PTZ camera]
If the watch is used for a long time, the preset position may be misaligned. It is recommended to
set position refresh using the schedule function and periodically correct camera misalignment.
Please refer to the table below for the setting.
1 Introduction
1.7 Instructions for use
6
Loading ...
Loading ...
Loading ...