Loading ...
Loading ...
Loading ...
92
D1/D1X/D1H Windows Me Registering the device driver
Installing Windows Hardware Drivers for the D1/D1X/D1H
Before You Begin
Confirm that the OHCI-compliant IEEE 1394 interface board has
been correctly registered with the system.
Click the My Computer icon on the desktop with the right mouse button
and select Properties from the menu that appears. The System
Properties dialog will be displayed; click the Device Manager tab.
The IEEE 1394 board or card
installed on your system
should be listed under "1394
Bus Controller"
If "1394 Bus Controller" is not listed in the Device Manager, or if
your IEEE 1394 interface board or card is listed as an unknown or
miscellaneous device or is preceded by red or yellow warning
icons, follow the instructions in the manual provided with the board
to ensure that the drivers are properly installed.
Updating Drivers for the D1
If you are already using the D1 with Nikon View DX or Nikon Capture,
you will need to update the camera drivers. Click here .
After installing Nikon View 6 (device driver) and restarting the
computer, connect your camera to the computer using an IEEE
1394 cable and turn on the camera. The camera is registered
automatically.
Before connecting the camera to the computer
Be sure to install Nikon View 6 (device driver) before connecting
your camera to the computer.
Loading ...
Loading ...
Loading ...