Loading ...
Loading ...
Loading ...
83
D1/D1X/D1H Windows 2000 Registering the device driver
Installing Windows Hardware Drivers for the D1/D1x/D1H
Before You Begin
Confirm that your OHCI-compliant IEEE 1394 interface board or
card has been correctly registered with the system.
Click the My Computer icon on the desktop with the right mouse
button and select Properties from the menu that appears to display
the System Properties dialog. Open the Hardware tab and click
the Device Manager... button in the Device Manager section.
If "1394 Bus Host Controller" is not listed in the Device Manager, or
if your IEEE 1394 interface board or card is listed as an unknown
or miscellaneous device or is preceded by a red or yellow warning
icon, follow the instructions in the manual provided with the board
to ensure that the drivers are properly installed.
Log On
You will need to log on as "Administrator" to register the D1/D1X/D1H.
After installing Nikon View 6 (device driver) and restarting the
computer, connect your camera to the computer using an IEEE
1394 cable and turn on the camera. The camera is registered
automatically.
Before connecting the camera to the computer
Be sure to install Nikon View 6 (device driver) before connecting
your camera to the computer.
Updating Drivers for the D1
If you are already using the D1 with Nikon View DX or Nikon Capture,
you will need to update the camera drivers. Click here .
The bus controller for your IEEE 1394 board or card
should be listed under "1394 Bus Host Controller"
Loading ...
Loading ...
Loading ...