Loading ...
Loading ...
Loading ...
91
Step 9
The dialog shown below will be displayed; click Finish.
Step 10
Confirm that "This device is working properly" appears under
"Device status" in the General Tab of the Nikon Digital Camera D1
Series Properties dialog. Click Close.
Step 11
Close the Device Manager, then click OK to close the System
Properties window.
Troubleshooting
• If "1394 Bus host Controller" is not displayed in the Device
Manager, if the IEEE 1394 board or card is listed under
"Other Devices" or "Miscellaneous Devices," or if the listing
for the IEEE 1394 board or card is preceded by a red or
yellow warning icon...
...the computer does not recognize the IEEE 1394 board or
card. Refer to the documentation provided with your
computer or IEEE 1394 board or card for information on
registering the board or card with the system.
• If "1394 Bus host Controller" is listed in the Device Manager
but the entry for the Nikon D1 (D1x/D1
H) does not appear...
...check the following:
• Is the camera on?
• Is the battery fully charged? If you are using an AC
adapter (available separately), is it properly connected?
• Is the mode dial set to "PC"?
• Is the IEEE 1394 cable properly connected?
Loading ...
Loading ...
Loading ...