Loading ...
Loading ...
Loading ...
For Thermistor probe types, the available conversion types are:
•
R(T)
•
Ohms
Refer to the Report of Calibration for the probe for information on the conver
-
sion type that the probe was calibrated for.
If the selected conversion type requires coefficients or other settings, the Con
-
version Settings button is enabled. Click the Conversion Settings button to dis
-
play the dialog for the selected conversion type. Otherwise, the Conversion
Settings button is disabled.
Note: The conversion settings are not written to the thermometer readout
until the Apply or OK button is clicked on this dialog!
4.4.1.5.2 Misc tab
Select the Misc tab to view and/or modify other probe settings.
Select the resolution for the readings for this probe using the Resolution
drop-down list. The resolution can be set to any value between 0 and 3, or
Auto.
User’s Guide
80
Figure 51 1523/1524 PRT/Thermistor Channel Settings – Misc tab
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...