Loading ...
Loading ...
Loading ...
2.3.3 Channels tab
After the thermometer readout and communication settings are configured, the
channels to acquire data from may be configured.
All controls on the Channels tab (with the exception of the Query Channels
button) are disabled until the channel information has been queried from the
thermometer readout.
Click the Query Channels button to allow LogWa re to communicate with the
thermometer readout to collect as much information regarding the current chan
-
nel configuration as possible.
After querying the thermometer readout for channel information, the Channels
list displays one item for each channel on the thermometer readout. The chan
-
nel number, module name, module channel number and currently assigned
channel name are displayed in the list.
By default, all channels are enabled, meaning data should be acquired from all
channels. The Enable All Channels and Disable All Channels buttons can be
used to enable or disable acquiring data from all channels of the thermometer
readout respectively.
To configure a channel, select the channel from the Channels list. The selected
channel’s settings are displayed in the other controls on this tab.
To acquire data from the selected channel, make sure the Acquire data from
this channel box is checked. If this box is not checked, all other channel con
-
trols are disabled and data will not be acquired for this channel.
User’s Guide
24
Figure 12 Log Session Settings - Channels Tab
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...