Loading ...
Loading ...
Loading ...
button is clicked, this dialog remains open. If the OK button is clicked, this dia
-
log closes after writing the settings.
LogWare has a feature that causes all of the module settings to be read back in
from the thermometer readout after the Apply button is clicked and the new set
-
tings have been written to the thermometer readout. This feature can be useful
to verify that the desired settings were properly applied to the thermometer
readout. To enable or disable this feature, see Section 5.6.4, Options.
To close this dialog without writing the module settings to the thermometer
readout, click the Cancel button.
Click the Help button to open the appropriate help topic for this dialog.
4.4.3.11.1 Channels tab
Select the Channels tab to view a list of channels on this module and to access
the channel settings dialogs to view and/or modify channel specific settings.
Select the channel to view and/or modify from the Channels list. This list indi
-
cates the channel number (with respect to this module) and the serial number of
the probe on each channel.
Click the Channel Settings button to display the appropriate channel settings di
-
alog. When this button is clicked, the settings for the selected channel are read
123
4 Tools
Thermometer settings dialogs
Figure 96 2566 TCS Module Settings - Channels tab
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...