Loading ...
Loading ...
Loading ...
If a delayed start time was selected, a dialog appears indicating the time that the
log session will begin. Otherwise, a dialog appears indicating that the log ses
-
sion will begin momentarily while LogWare initializes the thermometer readout
and finishes preparing to start the log session.
Note: If a delayed start time was selected and the Prompt to synchronize
real-time log session option is selected on the LogWare Options dialog, a
prompt is displayed asking if the synchronize feature should be disabled. If
the synchronize feature is not disabled, the log session will not start as ex
-
pected! For more details, please refer to Section 5.6.4, Options.
Once logging starts, one measurement is taken on each enabled channel at the
interval specified on the Log Session Settings dialog. If the Interval between
scan sequences feature was enabled, LogWare then waits the specified time and
repeats this process. Otherwise, this process is repeated without delay.
Note: Be aware that selecting any menu option while a real-time log ses-
sion is running may cause the measurement process to halt temporarily
until the menu is closed or the dialog that is displayed is closed! Also,
running other applications on the computer while logging real-time data,
especially those that require a lot of processing time or that access the
disk frequently, may cause the measurement process to halt temporarily
while the other application is busy. It is recommended that, once a
real-time log session is started, the software and the computer be left
alone to log the data without interruption.
If the log session was configured to stop logging at a specified time or after a
specific number of readings, LogWare continues to acquire data until the end
log criteria is met. The log session can be stopped manually at any time by se
-
lecting the Stop option in the Datalog menu or by clicking the button
on the toolbar.
When a log session is stopped manually, a prompt is displayed asking if the log
session window should be closed. The log session window may be closed at
this time or left open. In order to start a new log session, the current log session
window must be closed. Select Yes to close the log session window immedi
-
ately or select No to leave the window open.
To close the real-time log session window, select the Close option in the
Datalog menu or click the button on the toolbar. If the Show Log Ses
-
sion Settings dialog after closing log session option on the LogWare Options
dialog is checked, the Log Session Settings dialog is automatically displayed.
To prevent LogWare from displaying the Log Session Settings dialog after the
log session window is closed, uncheck this option. For more details, please re
-
fer to Section 5.6.4, Options.
User’s Guide
32
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...