Loading ...
Loading ...
Loading ...
Note: LogWare allows the readings history to be printed with or without
statistics while a real-time log session is running. However, when printing
the readings history during a real-time log session, be aware that the sta
-
tistical values may not exactly match the printed readings, since the statis
-
tics may get updated after the readings have already been printed. For
best results, only print the readings AFTER the real-time log session has
stopped.
The Always prompt to connect thermometer option determines whether
LogWare displays a prompt before attempting to communicate with the ther
-
mometer readout. These prompts are intended to be a reminder to the user to
connect the thermometer readout so that the software can communicate with it.
If the thermometer readout is frequently disconnected from the computer, this
option may be left checked. If the thermometer readout is always connected to
the computer, these prompts may become bothersome. In this case, uncheck
this option so that the prompts are not displayed.
The Show gridlines on graphs option determines whether gridlines are enabled
on the real-time log session and previous log session graphs by default. The
gridlines can be enabled or disabled for a specific graph at any time using the
Grids controls on the Axis tab of the Graph Settings dialog. Please refer to
Section 5.5.1.2, Axis Tab, for more details.
The Enable communication debugging option is used to enable debugging fea-
tures in LogWa re. This option should remain unchecked unless otherwise di-
rected by a Customer Service representative.
User’s Guide
196
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...