Loading ...
Loading ...
Loading ...
4.4.2.7 1529 Chub-E4 thermocouple channel settings
The 1529 Chub-E4 Thermocouple Channel Settings dialog displays informa
-
tion about the selected thermocouple channel.
Some or all of the settings on this dialog may be passcode protected. If so, a
message appears at the bottom of the Probe tab and/or Calibration tab and the
Edit button is displayed. The protected controls are disabled. To edit the pro-
tected settings, click the Edit button and enter the current passcode for the ther
-
mometer readout. If the correct passcode is entered, the protected controls are
enabled and the values may be changed. The controls remain enabled until this
dialog is closed or until the current changes are applied by clicking the Apply
button.
After modifying any of the settings on this dialog, click the Apply or OK but
-
ton to write the new settings to the thermometer readout. If the Apply button is
clicked, this dialog remains open. If the OK button is clicked, this dialog closes
after writing the settings.
LogWare has a feature that causes all of the channel settings to be read back in
from the thermometer readout after the Apply button is clicked and the new set
-
tings have been written to the thermometer readout. This feature can be useful
to verify that the desired settings were properly applied to the thermometer
readout. To enable or disable this feature, see Section 5.6.4, Options.
To close this dialog without writing the channel settings to the thermometer
readout, click the Cancel button.
Click the Help button to open the appropriate help topic for this dialog.
User’s Guide
94
Figure 64 1529 Chub-E4 Thermocouple channel settings dialog
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...